batte melt pump

automatic loss in weight feeder

Stretch film automatic loss in weight feeder unit has automatic flexible roll changing functions; that is, automatic cutting and roll changing. The whole machine, controlled by PLC. A automatic loss in weight feeder for discharging a flowable material from a reservoir through a controllable discharge member, including a closed loop controller configured to compare the actual rate at which material is discharged from the reservoir to a desired discharge rate. During the refill mode of operation,

Dosing loss in weight feeder systems

With the rapid development of industrial production,the solid constant feeding system which is a practical technology has been widely used in metallurgy, chemicals, cement, building materials, food and as well as other industry circles. So, in this situation, the demand of constant feeder is increasingly augmented. This system adopts the electromagnetic valve and flowmeter feeder as the constant feeding device, the feeder achieves the goal of constant feeding by controlling the flow. The PLC con

Loss-in-weight measurement in plastic modification operations

A brief description of the mixture In the processing of plastic materials, we often need to be a certain ratio of the synthetic resin base materials and other necessary accessories (such as slag, glass fiber) and additives (such as plasticizers, flame retardants, antioxidants , Nucleating agent, etc.) into the compounding extruder. This formula-based process is called plastic compounding. Plastic compounding dates back to the birth of celluloid in 1870. Since then, with the plastic coloring, ble

choose screws of the single-screw volumetric feeder

Depending on the material, the single-screw volumetric feeder has many different types of interchangeable screws to choose from. The feeder is mounted on a painted steel base and all contact with the material is stainless steel. The feeder is easy to dismantle to clean or replace parts. Unique ball bucket patented design, the material evenly from the ball hopper into the screw in all directions, effectively prevent the accumulation of material, and horizontal mixing is further improved the mater

loss-in-weight system screw feeder

loss-in-weight system Screw Feeders The loss-in-weight feeder system is normally supplied with a standard Rospen metering screw feeder either single or twin screw from 12mm to 250mm dia and output range from 1.0kg/hr to, in excess of 100,000kg/hr.The selection of the correct type of feeder from our extensive range is determined primarily by the type and specification of the material to be handled. Both single and twin, screw feeders are equally as efficient, with the single screw mechanically si

©2019 Batte Mechanical Zhengzhou Co,.Ltd. All rights reserved.
Batte is a professional screen changer manufacturer, supplying screen changer, especially screen changer for extrusion mould