coating film die lamination film die
coating film die lamination film die.
In the cast film die lip can be continuous non-blocking flow surface, with a small interval of the push-pull adjustment screw on the resin pressure and metal up and down bounce effect, bending the flexible lip can be adjusted to die gap.
The surface of all hard chrome plated, fasteners using 12.9 high strength bolts, high quality, durable stainless steel heating rods partition heating control.
Coating film die lamination film die production is stable, simple structure, easy to disassemble and clean.
Production of cast film and lamination film 0.02mm-0.4mm thick, precision products thickness error of 0.001mm, for the stationery film products, sanitary products film, adhesive film, plastic wrap, and so on.
For: PP, PE, TPU, PP, PE, EVA, CPE and other raw materials.
coating film die lamination film die abrasive width 400-6000mm.
Technical data
|
Item |
Specification |
|
Thickness of the product |
Thickness:0.002mm or 2μm (rate 5%) |
|
Width of the die |
Width: 700-4000mm adjustable |
|
Heat Voltage |
220V or according your need |
|
Heating way |
Heating bars made of stainless steel from Italy |
|
Die material |
2738 from Germany or P20 |
|
Fastening piece |
High strength at 12.9 grade |
|
Polishing |
Lips and surface of flowing: 0.02-0.03(μm),Other surfaces: 0.03-0.04(μm). |
|
Chrome thickness |
0.035-0.045mm |
|
Surface hardness |
60-70HR |
|
Installation |
according costumer’s request |